<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊 -行業動態
    行業動態
    濟南肯德基門是如何進行安裝的?
    來源: 2020-05-18 14:15:13
    肯德基門制作有其特點,所以安裝時候也和普通門窗的安裝有所不同。那么,肯德基門安裝的步驟是什么呢?
    KFC door production has its own characteristics, so the installation time is also different from the installation of ordinary doors and windows. So, what are the steps of KFC door installation?
    第一步:清理門洞,剔除多余部分,保證門洞兩側都在垂直線上;
    Step 1: clean the door opening, remove the redundant parts, and ensure that both sides of the door opening are on the vertical line;
    第二步:安裝門框上的頂軸部分;
    Step 2: install the top shaft part on the door frame;
    第三步:用螺絲或鉚釘組合門框的三根型材;
    Step 3: assemble three profiles of door frame with screws or rivets;

    第四步:安裝地軸,在地上開出合適長寬和縱深的方形坑。澆注砂漿,固定地軸的時候從頂軸的中心用線錘垂直至地軸軸承的中心固定好地軸、水泥干燥后進行下一步。

    濟南肯德基門

    Step 4: install the ground shaft, and make a square pit with appropriate length, width and depth on the ground. When pouring mortar, fix the earth axis from the center of the top axis to the center of the earth axis bearing with a plumb bob, fix the earth axis and dry the cement before proceeding to the next step.
    第五步:安裝門體的上軸和下軸;
    Step 5: install the upper and lower shafts of the door body;
    第六步:安裝門前需要注意的兩點;
    Step 6: two points to be noticed before installing the door;
    1、松開門扇上的防盜卡位螺絲;
    1. Loosen the anti-theft locking screw on the door leaf;
    2、裝門扇前在地軸上抹潤滑黃油使門扇開合自如增加使用壽命。
    2. Before installing the door leaf, apply lubricating grease on the floor shaft to make the door leaf open and close freely and increase the service life.
    第七步:按上個步驟安裝另外門扇;
    Step 7: install another door leaf according to the previous step;
    第八步:
    Step 8:
    1、調試門扇位置的方法,松開蓋板可以用扳手調節地軸的螺絲;
    1. Adjust the position of the door leaf by loosening the cover plate and adjusting the screw of the floor shaft with a wrench;
    2、調試門扇上下方法,具體方法是調試下軸上的六棱螺絲順時針調試
    2. Adjust the upper and lower methods of the door leaf. The specific method is to adjust the hexagon screw on the lower shaft clockwise
    門扇向上,逆時針調試門扇向下;
    Door leaf up, anticlockwise debugging door leaf down;
    第九步:緊勞防盜卡位螺絲;
    Step 9: tighten the lock screw;
    第十步:安裝閉門器,安裝方法見閉門器配套安裝說明書。調試閉門器開關門速度,安裝完畢。
    Step 10: install the door closer. For the installation method, please refer to the installation manual of the door closer. Adjust the opening and closing speed of the door closer, and install it.
    本文由濟南肯德基門進行編寫,想要了解更多的產品及更詳細的精彩內容,請關注我們的網站:http://www.policedontmove.com您的惠顧是對我們很大的支持。
    This article is written by Jinan KFC. If you want to know more products and more details, please pay attention to our website: http://www.jnclmmcc.com your patronage is a great support for us.
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分