<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊 -行業動態
    行業動態
    斷橋鋁門窗在高度和寬度的設計標準
    來源: 2020-05-12 14:34:22
    1、窗戶高度
    1. Window height
    一般住所修建中,窗的高度為1.5m,加上窗臺高0.9m,則窗頂距地板面2.4m。窗的高度應依據采光、通風、空間形象等要求來決議,但要留意窗戶過高的剛度問題,必要時要加設橫梁或"拼樘"。在公共修建中,整塊玻璃的高度有的已超越7.2m,那已不歸于一般窗戶的范圍了。
    In the construction of general residence, the height of window is 1.5m, and the height of windowsill is 0.9m, so the top of window is 2.4m away from the floor. The height of the window shall be determined according to the requirements of daylighting, ventilation, space image, etc., but attention shall be paid to the high rigidity of the window, and if necessary, beams or "splices" shall be added. In public buildings, the height of the whole glass has exceeded 7.2m, which is not included in the scope of ordinary windows.
    2、窗戶寬度
    2. Window width

    窗寬一般由0.6m開端,依據修建標準洞口標準中的規則,一般修建洞口的寬度模數是300mm,即一般寬度為600mm、900mm、1200mm、1500mm等以此類推。需留意的是,當窗洞過寬時,應加設豎向龍骨或“拼樘”,否者簡單呈現窗戶的剛度問題。

    濟南斷橋鋁門窗

    Generally, the window width starts from 0.6m. According to the rules in the standard for construction of openings, the width modulus of openings is generally 300mm, that is, the width is generally 600mm, 900mm, 1200mm, 1500mm and so on. It should be noted that when the window opening is too wide, vertical keel or "splicing frame" should be added, or the rigidity of the window will be simply presented.
    斷橋鋁門窗的門:
    Doors of aluminum doors and windows for bridge breaking:
    1、門的高度
    1. Height of door
    通行的門,高度一般不低于2m,再高也以不宜超越2.4m,否則有空泛感,門扇制造也需特別加強。如造型、通風、采光需求時,可在門上加腰窗,其高度從0.4m起,但也不宜過高。
    The height of the passing door is generally no less than 2m, and no higher than 2.4m. Otherwise, there is a sense of emptiness, and the manufacturing of the door leaf also needs to be strengthened. For example, waist window can be added to the door when modeling, ventilation and lighting are required, and its height shall be from 0.4m, but it shall not be too high.
    供車輛或設備經過的門,要依據具體情況決議,其高度宜較車輛或設備高出0.3~0.5m,避免車輛因顛簸或設備需求墊滾筒轉移時磕碰門框。至于各類車輛通行的凈空要求,要查閱相應的標準。
    The door for the vehicle or equipment to pass through shall be determined according to the specific situation, and its height shall be 0.3-0.5m higher than that of the vehicle or equipment, so as to avoid the collision of the door frame when the vehicle is bumped or the equipment needs to be transferred by the pad roller. As for the clearance requirements of various vehicles, please refer to the corresponding standards.
    如果是體育場館、展覽廳堂之類大體量、大空間的修建物,需求設置超標準的門時,可在大門扇上加設慣例標準的附門,供大門勿需敞開時,人們能夠通行。
    If it is a large-scale and large space building such as a stadium, exhibition hall, etc., and it needs to set a super standard door, it can add a conventional standard side door on the door leaf, so that people can pass when the door does not need to be open.
    如今修建內各種設備管井的查看門頗多,它不是常常經過的當地,所以一般上框高與一般門齊或還低一些,下邊還留有與踢腳線同高的門檻,其凈高就不用拘泥于2m,1.5m左右即可。旅館客房,門洞凈高≥2.1m。
    Nowadays, there are many inspection doors for various kinds of equipment and tube wells in the building, which are not often passing through the local area. Therefore, generally, the upper frame height is the same as or lower than the general door, and there is still a threshold with the same height as the skirting line at the bottom, so the net height is not limited to 2m, 1.5m or so. For hotel rooms, the clear height of the door opening shall be no less than 2.1m.
    2、門的寬度
    2. Width of door
    一般住所分戶門0.9~1m,分室門0.8~0.9m,廚房門0.8m左右,衛生間門0.7~0.8m,因為考慮現代家具的搬入,如今多取上限標準。公共修建的門寬一般單扇門1m,雙扇門1.2~1.8m,再寬就要考慮門扇的制造,雙扇門或多扇門的門扇寬以0.6~1.0m為宜。旅館客房門洞寬度一般≥0.9m,衛生間門洞寬≥0.75m。
    Generally, the door of the residence is 0.9-1 m, the door of the room is 0.8-0.9 m, the door of the kitchen is about 0.8 m, and the door of the toilet is 0.7-0.8 M. because the moving in of modern furniture is considered, the upper limit standard is adopted now. The door width of public construction is generally 1 m for single door and 1.2-1.8 m for double door. The manufacturing of door leaf shall be considered for the second width. The door leaf width of double door or multiple doors shall be 0.6-1.0 M. The width of the door opening of the hotel guest room is generally ≥ 0.9m, and that of the bathroom is ≥ 0.75m.
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分