<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊 -公司動態
    公司動態
    肯德基門窗配件及裝置技巧
    來源: 2019-08-08 16:15:35
    肯德基門制造工藝
    KFC Door Manufacturing Technology
    1.鋁合金型材采用特殊加厚加寬設計,廢品組裝而且全部采用不銹鋼緊固件緊固,肯德基門扇角部采用加厚鋁合金槽形角碼銜接,銜接處采用高頻氬弧鋁焊接,使構造銜接結實、抗沖擊,不易變形,運用壽命持久。
    1. Aluminum profiles are designed with special thickening and widening, scraps are assembled and fastened with stainless steel fasteners. The corner of KFC doors is joined with a thickened aluminium alloy slot angle code, and the joints are welded with high frequency argon arc aluminium, which makes the structural joints stronger, impact-resistant, non-deformable and durable.
    2. 門框增加密封槽,門扇邊縫加裝密封毛條,從而起到防風、防塵、防隔音,密封效果好。
    2. Sealing groove is added to the door frame, and sealing strip is added to the side seam of the door fan, so as to prevent wind, dust and sound, and the sealing effect is better.
    3. 玻璃采用鋼化玻璃,強度高、平安。
    3. Glass is made of toughened glass with higher strength and safety.
    4. 加裝閉門器和滾動軸承式合頁,使門扇可以輕松自若自動開啟且無任何雜音和碰撞。
    4. The door closer and rolling bearing hinge are added to make the door fan open easily and automatically without any noise and collision.
    裝置留意事項
    Installation Notes
    1、主要平安技術措施:射槍
    1. Main Safety Technical Measures: Shooting Guns
    1)操作人員要經過培訓,嚴厲按規則程序操作,工作時要戴防護眼鏡,嚴禁槍口對人。
    1) Operators should be trained to operate strictly in accordance with the rules and procedures, wear protective glasses when working, and strictly prohibit the muzzle of guns against people.
    2)射釘彈要按有關爆炸和風險物品的規則停止搬運、儲存運用,寄存環境要整潔、枯燥、通風良好、溫度不高于40度,不得碰撞,用火烘烤或高溫加熱射釘彈,啞彈不得隨地亂丟。
    2) Nail projectiles shall be handled, stored and used in accordance with the rules concerning explosions and dangerous articles. The storage environment shall be clean, dry, well ventilated, with temperatures not higher than 40 degrees, collision shall not be allowed, nail projectiles shall be baked by fire or heated at high temperature, and dumb projectiles shall not be thrown anywhere.
    3)墻體必需結實、堅實并具接受射沖力的剛度
    3) The wall must be strong, firm and rigid to accept the impulse of fire.
    4)釘特種鋼釘應選用重量大的榔頭,操作人員要戴防護眼鏡。為避免鋼釘飛跳傷人,可用鉗子夾住再行敲擊。
    4) Hammers with heavy weight should be used for nailing special steel nails. Operators should wear protective glasses. In order to avoid injuries caused by steel nails flying, clamps can be used to knock again.
    2、肯德基門的玻璃搬運和裝置
    2. Glass handling and installation of KFC doors
    1)搬運玻璃前首先檢查玻璃能否有裂紋,特別要留意暗裂,確認完好才搬運。
    1) Before handling glass, check whether there are cracks in the glass first, pay special attention to cracks, and confirm that the glass is in good condition before handling.

    2)搬運玻璃時必需戴手套、穿長袖衫,玻璃要豎向,以防玻璃銳邊割手或玻璃斷裂傷人。

    濟南肯德基門窗

    2) Gloves and long-sleeved shirts must be worn when handling glass. The glass should be vertical in order to avoid cutting hands or breaking glass.
    3)高處裝置玻璃時應穩妥置放,其垂直下方不得有人。
    3) When installing glass at high altitude, it should be placed safely, and no one should be placed vertically below it.
    4)風力五級以上難以控制玻璃時,應中止搬運和裝置玻璃。
    4) When it is difficult to control the glass at or above the fifth wind power level, the handling and installation of the glass should be stopped.
    3、防止工程質量通病
    3. Preventing Common Engineering Quality Faults
    ⑴肯德基門門窗框暫時固定后,在填塞與墻體之間的縫隙前,留意不要使門窗框移位傾斜變形,應待門窗框裝置固定結實后,再除掉定位木楔或其他用具。
    (1) After temporarily fixing the door and window frames of KFC, before filling the gap between the door and the wall, pay attention not to make the door and window frames shift and tilt, but to remove the positioning wedge or other appliances after the door and window frame devices are fixed and consolidated.
    ⑵施工時嚴厲做好產品維護,及時補封好破損掉落的維護膠紙和薄膜,并及時肅清濺落在鋁門窗外表的灰漿污物。
    (2) Strictly maintain the products during construction, timely repair and seal the damaged and falling maintenance adhesive paper and film, and timely remove the slurry and dirt splashed on the exterior of aluminium doors and windows.
    ⑶肯德基門玻璃厚度與扇挺鑲嵌槽及密封條的尺寸配合要契合國度規范及設計請求,裝置密封條時應留有伸縮余量。
    (3) The thickness of KFC door glass should match with the size of fan tappet inlay groove and sealing strip in accordance with national specifications and design requirements, and the expansion allowance should be left when the sealing strip is installed.
    ⑷運用工具清算肯德基門外表時不得劃傷、割傷鋁合金型材外表。
    (5) When using tools to liquidate the appearance of KFC doors, no scratches or cuts shall be allowed on the appearance of aluminium alloy profiles.
    ⑸肯德基門外表污跡應用特地溶劑或干凈的水及棉紗清洗掉,填嵌密封膠多余的膠痕要及時清算掉,確保竣工的鋁門窗外表整潔美觀。
    (5) KFC doors should be cleaned with special solvents or clean water and cotton yarn. Redundant sealant marks should be cleared in time to ensure that the finished aluminum doors and windows look neat and beautiful.
    4、產品維護
    4. Product Maintenance
    ⑴肯德基門運輸時應妥善捆扎,樘與樘之間用非金屬軟質資料隔墊開,吊運時選擇可靠平整的作點,避免門窗互相磨損、擠壓扭曲變形,損壞附件。
    (1) KFC doors should be properly bundled when transporting. The diaphragm and diaphragm should be separated by non-metallic soft data. Reliable and flat points should be selected when hoisting to avoid wear, extrusion, distortion and damage of accessories.
    ⑵肯德基門進入施工現場后應在室內豎直排放,產品不能接觸空中,底部用枕木墊平高于空中100MM以上,嚴禁與酸、堿性資料一同寄存,室內應清潔、枯燥、通風。
    (2) KFC doors should be discharged vertically indoors after entering the construction site. The products can not touch the air. The bottom of the pillows is above 100MM. It is strictly forbidden to store with acid and alkaline data. The indoors should be clean, dull and ventilated.
    ⑶肯德基門裝入洞口暫時固定后,應檢查周圍邊框和中間框架能否用規則的維護膠紙和塑料薄膜封包扎好,再停止門窗框與墻體裝置縫隙的填嵌密封和洞口墻體外表裝飾等施工,以避免水泥砂漿、灰水、噴涂資料等污損鋁門窗外表。
    (3) After KFC doors are temporarily fixed in the entrance of the tunnel, it is necessary to check whether the surrounding frame and the intermediate frame can be sealed with regular maintenance glue paper and plastic film, and then stop the construction of filling and sealing the gap between the door frame and the wall device, and the external decoration of the entrance wall, so as to avoid the staining of aluminium doors and windows by cement mortar, lime water, spraying materials, etc. Appearance.
    以上內容就是濟南肯德基門窗小編為大家整理的,希望對大家有所協助。想要了解多內容,歡迎訪問網站:http://www.policedontmove.com
    The above contents are arranged for you by the small edition of Jinan KFC doors and windows. I hope to help you. For more information, please visit the website: http://www.policedontmove.com.
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分