<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊
    新聞資訊
    肯德基門檢查達標分為這幾布!
    來源: 2018-12-06 10:24:58
    扼要介紹肯德基門查看:關于肯德基門鋁合金產品來說,外觀非常重要,由于它的首要材料是鋁型材,假設沒有腐蝕的特征,很快就會蒙上暗影,所以將進行外表處理。外表處理一般是為了取得出色的裝飾功用和防護功用,因而耐腐蝕性是鋁合金肯德基門窗產品的重要方針。
    Brief introduction to KFC door inspection: For KFC door aluminium alloy products, appearance is very important, because its primary material is aluminium profiles, assuming there is no corrosion characteristics, it will soon be shadowed, so the appearance will be treated. Appearance treatment is generally to achieve excellent decorative and protective functions, so corrosion resistance is an important policy for KFC doors and windows.
    一般來說,鋁合金產品外表處理具有出色的防護功用,其防護功用好,尤其是噴霧產品能夠惡劣的環境條件下使用的產品,鋁合金的耐腐蝕實驗方法的點評有很多種,其間,鹽霧實驗和廣泛用熱實驗。
    Generally speaking, the surface treatment of aluminum alloy products has excellent protective function, and its protective function is better. Especially when spraying products can be used in harsh environmental conditions, there are many reviews on the corrosion resistance test methods of aluminum alloys, among which salt spray test and the most extensive heat test are the most widely used.
    肯德基門窗的質量操控首要包括所用材料的質料、門窗用型材和制品門窗等三個方面。質料和型材,都已有相應的標準規則,首要是查驗外表狀況以及型材的耐低溫沖擊功用和高溫縮短變形等。
    The quality control of KFC doors and windows mainly includes materials used, profiles used for doors and windows, and doors and windows manufactured. There are corresponding standard rules for materials and profiles. The first thing is to check the appearance, low temperature impact resistance and high temperature shortening deformation of profiles.
    制品門窗應操控查驗的首要項目為:抗風壓功用、氣密性、水密性、保溫功用、空氣聲隔聲功用、采光功用以及各種機械力學功用。
    The main items for control and inspection of products'doors and windows are: wind pressure function, air tightness, water tightness, heat preservation function, air sound insulation function, lighting function and various mechanical functions.
    三性方針是肯德基門窗功用等級的要害方針,建筑師對建筑物進行設計時,用于建筑物工程上的肯德基門窗的三性等級,是必需的方針。關于別的三性,由于目前還沒有對其進行強行規則·所以一般只在工程上有這一要求時,才對其進行檢。

    The three-character policy is the key policy of the functional grade of KFC doors and windows. When architects design buildings, the three-grade policy of KFC doors and windows used in building engineering is a necessary policy. As for the other three characteristics, there are no mandatory rules for them at present, so they are usually checked only when there is such a requirement in engineering.

    肯德基門窗的查驗內容因工序不同而異,如切開下料工序就是下料尺度的準性,而焊接工序又首要是焊好的門窗的尺度精確性,關于成窗而言,除了尺度查驗外,還要對門窗的啟團功用進行檢·當然焊接的角強度檢是肯德基門窗加工中必不可少的檢測項目,它是關系到門窗使用壽命的要害數據。
    The inspection contents of KFC doors and windows vary according to different procedures. For example, cutting and cutting process is the accuracy of cutting scale, while welding process is the first step to measure the accuracy of welded doors and windows. As for window forming, besides scale inspection, it is also necessary to check the opening function of doors and windows. Of course, the corner strength inspection of welding is KFC doors and windows. Inspection items are indispensable in processing, which are the key data related to the service life of doors and windows.
    所謂角強度就是焊接角的強度,用專門的角強度測試儀進行檢測。在焊好的型材上截取長200m左右的一個角,放到專門的模子上,以實驗機空載的速度對焊角加壓,直至焊角決裂,讀取焊角決裂時查驗儀器上的讀數,便是焊角強度。
    The so-called angular strength is the strength of the welding angle, which is tested by a special angular strength tester. Cut a corner about 200 m long on the welded profile and put it on a special die. Pressure the welding angle with no-load speed of the experimental machine until the welding angle cracks. Read the reading on the inspection instrument when the welding angle cracks, that is, the welding angle strength.
    一般來說焊角強度越大,其焊角功用越好,門窗反抗風壓的才能就越大,反之亦然。這個角強度的檢,在新頒布的肯德基門型材標準中,將其檢方法作了改。
    Generally speaking, the greater the strength of the fillet, the better the function of the fillet, the greater the ability of windows and doors to resist wind pressure, and vice versa. This angular strength test has been changed in the newly promulgated KFC door profile standard.
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分