<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊
    新聞資訊
    陽光房斷橋鋁門窗質量達標,需求留意的要求
    來源: 2018-08-11 14:19:45
    密閉性要求、防滲漏要求、框扇結構要求、保溫隔熱要求、安全技能要求
    Requirements for airtightness, leakage prevention, frame fan structure, heat insulation and safety skills
    陽光房規劃、收購、施工過程中清晰外門窗的技能要求,到達抗風壓、水密性、氣密性、保溫、隔聲、采光、安全等方面的功能要求,避免外門窗工程常見問題的重復發作,濟南陽光房共享門窗質量控制五大要害點,掌握這五大規范,門窗質量沒有不好的!
    The technical requirements of clear external doors and windows in the process of planning, acquisition and construction of sunshine houses can meet the functional requirements of wind pressure resistance, water tightness, air tightness, heat preservation, sound insulation, lighting, safety and so on, avoid the recurrence of common problems in the project of external doors and windows. The five key points of quality control of shared doors and windows in Jinan sunshine houses should be mastered. Big specification, the quality of doors and windows is not bad.
    密閉性要求
    Tightness requirements
    1、角部密封條(膠角):密封條應避免轉角拼接,應將轉角處密封條規劃成90度整體式膠角。
    1. Corner sealing strip (glue angle): The sealing strip should avoid corner splicing, and the corner sealing strip should be planned into 90-degree integral glue angle.
    2、框扇密封條:敞開扇部位宜規劃三道密封膠條,別離為主密封膠條、扇壓邊膠條和框壓邊膠條。
    2. Frame-fan sealing strip: Three sealant strips should be planned in the open fan area, separated from the main sealant strip, fan blank holder strip and frame blank holder strip.
    防滲漏要求
    Leakage prevention requirements
    1、外窗有必要設置排水通道、排水口、排氣孔(氣壓平衡孔),排出窗框扇內積水。排水口外側應設扣蓋,避免強風將雨水、塵埃吹入窗扇。
    1. It is necessary to set up drainage channel, drainage outlet and exhaust hole (air pressure balance hole) in the outer window to discharge the water accumulated in the window frame and fan. The outside of the outlet should be provided with a buckle cover to prevent the strong wind from blowing the rain and dust into the window sash.
    2、隔熱條應選用C型結構,與表里鋁型材復合后在同一個水平面上,避免隔熱條處積水構成滲漏、腐蝕危險,一起可添加隔熱條長度,進步熱工功能。
    2. Heat insulating strip should be C-shaped structure, and the surface of the aluminum profile composite in the same horizontal plane, to avoid the heat insulating strip water leakage, corrosion risk, together with the length of heat insulating strip can be added to improve the thermal function.
    3、門窗洞口尺度:結構洞口預留不該過大,避免封堵困難構成滲漏危險。
    3. Size of entrance of doors and windows: Reserved entrance of structure should not be too large to avoid leakage danger caused by sealing difficulties.
    4、企口:窗洞因為特別原因,如外墻為石材幕墻,洞口預留尺度大,結構洞口主張做企口,企口應與混凝土墻一起澆筑。
    4. Gate: Because of special reasons, such as stone curtain wall for the external wall, hole reserved large scale, structure hole advocate to do the mouth, mouth should be poured with concrete wall.
    5、外窗臺板:外墻材料為涂料的修建,主張選用金屬窗臺板。金屬窗臺板內側應壓入窗框,外側杰出墻面做滴水。
    5, outside window plank: the outer wall material is the construction of the paint, advocate to choose metal window sill. The inner side of the metal window sill should be pressed into the window frame, and the outer wall should be dripping.
    6. 窗框與結構洞口:窗框宜立中裝置,如靠外側裝置,應向內收進20mm,避免結構施工差錯導致窗框裝置在結構外皮以外,構成雨水滲漏。
    6. Window frame and structural opening: window frame should be erected in a neutral device, such as by the lateral device, should be retracted inward 20 mm, to avoid structural construction errors lead to the window frame device outside the structure skin, constitute rain water leakage.

    濟南陽光房

    框扇結構要求

    Frame fan structure requirements
    1、組角:組角是關系到門窗整體性的重要工序。
    1, group angle: group angle is an important process related to the integrity of doors and windows.
    2、抹膠工藝:一般情況下應選用角碼+抹組角膠工藝,窗角制止未抹膠即揉捏成型。
    2. Plastering process: Generally speaking, corner code plus plastering group should be chosen, window angle should be prevented from plastering or kneading.
    3、注膠工藝:組角亦可選用角碼+導膠槽+注膠孔+雙組份注膠+角片工藝,確保角部強度要求,確保門窗成品在運輸、裝置后無變形移位現象的呈現。
    3. Glue injection process: corner code + glue chute + glue injection hole + two-component glue injection + glue filler can also be used to ensure corner strength requirements, to ensure that the door and window products in the transport, device after no deformation and displacement phenomenon.
    保溫隔熱要求
    Thermal insulation requirements
    1、型材的腔體規劃:型材應選用多腔體結構,削減熱量的丟失,一起應使外窗隔熱構件上下共面,構成整體隔熱面,消除冷橋,阻斷熱量丟失通道。
    1. Profile cavity planning: Profile should choose multi-cavity structure to reduce the loss of heat, together should make the outer window insulation components up and down together, constitute the overall insulation surface, eliminate the cold bridge, blocking the heat loss channel.
    2、玻璃裝置槽內宜裝置隔熱膠條:添加空氣腔室的數量,降低中空玻璃四周與型材之間的熱量丟失,進步整窗的保溫效果。
    2. Insulation tape should be installed in the groove of glass device: the quantity of air chamber is added to reduce the heat loss between the hollow glass and the profiles and improve the whole window insulation effect.
    3、窗扇應選用T型隔熱條規劃:窗扇隔熱條規劃為T型,與中心膠條搭接,實現扇框銜接處冷熱分區。制止將中心膠條直接搭在扇的鋁型材上。
    3. The window should be planned with T-type heat insulating strip: the window should be planned with T-type heat insulating strip, which is overlapped with the central rubber strip to realize the cold and hot zoning at the junction of the fan frame. The central adhesive strip should be directly covered on the fan aluminum.
    5、玻璃暖邊條:雙層中空玻璃空腔四周宜設置暖邊條,阻斷玻璃空腔散熱通道。
    5. Glass warm edge: Double-layer hollow glass cavity should be set around the warm edge, blocking the glass cavity cooling channel.
    6、在傳熱系數要求高的地域,可根據項目定位,在型材隔熱腔體內添加保溫隔熱材料,滿足K值要求。
    6. In areas with high heat transfer coefficient requirements, heat insulation materials can be added into the profile insulation chamber to meet the K value requirements according to the project location.
    7、外門:住所首層住戶通向花園的外平開門應設門檻,制止不設門檻,門底部用毛刷關閉。住所首層住戶通向花園的雙扇平開外門,關閉后兩扇應咬合搭接,制止中心留縫用毛刷關閉。
    7. Outdoor: The flat door of the first floor of the dwelling house to the garden should be set a threshold to prevent the door from being set, and the bottom of the door should be closed with a brush. Residents on the first floor of the dwelling have two flat open doors to the garden. After closing, the two doors should be bitten and overlapped to prevent the center seam from closing with a brush.
    安全技能要求
    Safety skill requirement
    1、玻璃扣條:玻璃扣條應裝置在室內一側,制止將內開窗翻轉成外開窗使扣條裝置在室外一側,確保防盜、安全、玻璃替換的要求,不留滲漏危險。
    1. Glass buckles: Glass buckles should be installed on the indoor side, prevent the inside window from turning into the outside window so that the buckle device on the outdoor side, to ensure theft, safety, glass replacement requirements, no leakage risk.
    2、鎖點:為進步外窗抗風壓強度及防盜功能,外窗應選用多點鎖。鎖點設置應滿足五金廠家規劃裝置手冊要求。
    2, lock point: to improve the external window resistance to wind pressure and anti-theft function, the external windows should use multiple locks. The installation of locking points shall meet the requirements of hardware manufacturers' planning device manuals.
    3、單元進口外門尺度不該過大,以確保合頁等五金配件的可靠性,避免發生安全事故。

    3. The dimension of the outer door of the unit inlet should not be too large to ensure the reliability of the hardware fittings such as hinge and avoid safety accidents.

    (多關注新聞動態,請關注):http://www.policedontmove.com/

    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分