<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊
    新聞資訊
    關于肯德基門的安裝步驟
    來源: 2018-06-22 16:03:07
    現在很多店鋪和商家都會選擇安裝濟南肯德基門,因為肯德基門無論時從質量還是外觀都是消費者比較滿意的,再加上使用起來是比較方便的,開關自如節省了許多時間,但是有的客戶表示對肯德基門安裝步驟不是很清楚,下面濟南肯德基門廠家的小編給大家詳細介紹一下肯德基門的安裝步驟。
    Now many shops and businesses will choose to install Ji'nan Kentucky gate, because Kendl Ki Men, both from the quality and the appearance are satisfied with the consumer, and the use is more convenient, the switch saves a lot of time, but some customers say that the Kentucky gate installation steps are not very clear, Ji'nan KFC door manufacturer Xiaobian to give you a detailed description of Kendl Ki Men installation steps.
    一步:清理門洞,剔除多余部分、保證門框兩側都在垂直線上;

    The first step is to clean up the door, eliminate the unnecessary parts and ensure that both sides of the doorframe are on the vertical line.

    濟南肯德基門

    第二步:用螺絲或柳釘組合門框的三支型材,然后固定門框與墻體之間的鏈接;
    The second step: use the screws or willow nails to combine the three sections of the doorframe, then fix the links between the doorframe and the wall.
    第三步:安裝地軸,固定地軸時從頂軸的中心線垂直至地軸軸承的中心,在地面開出與地軸盒長、寬、高度相符的尺寸,用螺絲或水泥沙漿固定好地軸;
    The third step is to install the ground shaft, when the fixed axis is fixed from the center line of the top axis to the center of the bearing of the ground shaft, the size that is consistent with the length, width and height of the ground box is drawn on the ground, and the ground shaft is fixed with screw or cement mortar.
    第四步:安裝濟南肯德基門的門體。松開門扇上的防盜卡位螺絲,抽出上軸的軸心部分;在地軸軸承上抹上潤滑油以使門扇開合自如,增加使用壽命;
    Fourth step: install the Kentucky gate in Ji'nan. Loosen the anti-theft screw screw on the door leaf, pull out the shaft part of the upper shaft, lubricate the bearing on the ground shaft so that the door leaf can be opened and unblocked, and the service life is increased.
    第五步:調試門扇。調試門扇的前后左右方向:打開地軸盒蓋板,用扳手調節地軸的螺絲;調試門扇的高低間隙方法:調試下軸上的內六角螺絲,順時針調試門扇上升,逆時針調試門扇下降;
    Fifth step: debug the door fan. Debug the front and left direction of the door: open the cover plate of the shaft box, adjust the screw of the ground shaft with the wrench, debug the high and low gap method of the door fan, debug the inner six angle screws on the shaft, debug the door fan clockwise, and debug the door fan against clockwise;
    第六步:緊牢防盜卡位螺絲;
    The sixth step: tighten up the anti-theft card screw;
    第七步:安裝調試閉門器,見閉門器配套說明書,安裝完畢。
    The seventh step: install and debug the door closer, see the door closer, complete the installation.
    如有需要,歡迎新老客戶前來選購!我們本著質優價廉的宗旨來為您提供產品和服務。真誠期待與您合作!
    If there is a need, welcome new and old customers to choose and buy! We aim to provide products and services for you with the aim of quality and low price. Sincerely look forward to working with you!
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分