<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊 -公司動態
    公司動態
    斷橋鋁門窗型材標準及選擇
    來源: 2017-05-18 14:03:55
    市場上的斷橋鋁門窗比較多,同時也比較雜,有些是正規的商家,而有的只是一味的為了謀取大利潤,所以選購時應慎重,下面看看斷橋鋁門窗型材的標準及選擇:
    Broken bridge aluminum doors and Windows is more on the market, but also are more diverse, some of them are regular merchants, and some just in order to reap greater profits, so be cautious when the choose and buy, look at the broken bridge aluminum doors and Windows profiles below standard and options:
    1.型材壁厚:一般的家裝產品,國家規定使用標準的壁厚不得小于1.4mm,具體厚度由設計師設計選定。那么壁厚小于1.4mm的都屬于非標產品;
    The wall thickness of the section: general furniture product, the wall thickness that the country stipulates USES standard is not less than 1.4 mm, the specific thickness is chosen by stylist design. So those that are less than 1.4 mm are non-standard products;
    2.隔熱條:隔熱條是斷橋鋁型材關鍵的組成部分,國家規定必須使用PA66的尼龍條,市場上一些廠家使用便宜的PVC塑料隔熱條,這樣會影響產品的使用壽命;
    Article 2. The heat insulation: insulation is the most key part of the broken bridge aluminum extrusions, the provisions of the state must use PA66 nylon, some manufacturers use the cheaper in the market of PVC plastic insulation, this will affect the service life of the product;
    3.玻璃:斷橋鋁門窗必須采用不同厚度的中空玻璃,原片是浮法玻璃,厚度標準是5mm,兩片玻璃之間的隔熱條厚度在12mm--15mm之間,根據門窗型材規格設定;
    3. Glass: the broken bridge aluminum doors and Windows must adopt different thickness of the hollow glass, glass is float glass, the thickness of the standard is 5 mm, the article insulation thickness between the two pieces of glass between 12 mm, 15 mm, according to the doors and Windows profile specification set;
    4.門窗膠條:膠條要選用進口三元乙丙產品,其使用壽命達30年,而普通的劣質產品壽命僅僅5年左右。
    Window glue strip: the glue bar should choose to import 3 dollar ethylene product, its service life is 30 years, and ordinary inferior product life is only about 5 years.
    斷橋鋁門窗型材的選用
    The selection of the section of the section of the bridge
    a、型材壁厚:一般作家裝產品,門窗廠多數選用出材率高的產品也就是壁厚比較薄的產品以降低造價,國標規定:型材厚度應大于或等于1.4mm。
    A, section thickness: general writer products, doors and Windows factory most of the material of high rate of products is the wall thickness thin products to reduce cost, gb regulation: material thickness should be greater than or equal to 1.4 mm.
    b、隔熱條:隔熱條使斷橋鋁型材關鍵造成部分,必須使用PA66尼龍,這是國家標準規定的,但目前裝修市場上很多廠家使用便宜的PVC塑料隔熱條,這將嚴重影響產品使用壽命。
    Article b, heat insulation, heat insulation broken bridge aluminum most key part, must use PA66 nylon, this is the standard provisions of the state, but the decoration on the market many manufacturers use cheap PVC plastic insulation, this will seriously affect the service life of the product.
    c、盡量采用原廠原裝產品,不是二次噴涂自行穿條產品,那些可以讓顧客隨意挑選型材顏色的多數是二次噴涂自行穿條產品,產品質量無法與原廠原裝產品相比。
    C, try to use original factory original product, not secondary spraying to wear of the product, and choose those that let customers profile color mostly secondary spraying to wear of the product, the quality of the product cannot be compared with the original factory original package products.
    我們一直來都爭取為客戶提供完美的服務,有廣大客戶的信任與支持,我們才會做得好,走的遠,為客戶們送去理想的產品,期待與您攜手共創美好未來!
    We have to have to provide more perfect service for the customer, with the majority of customers trust and support, we will do better and go further, sent to the ideal product for the customer, look forward to working with you hand in hand altogether will create the glorious future!
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分