<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊 -公司動態
    公司動態
    斷橋鋁門窗型材的選用問題
    來源: 2016-04-28 18:12:31
    斷橋鋁門窗型材的選用問題:
    Broken bridge aluminum doors and Windows profile selection of questions:
    1、盡量選用原廠原裝商品,不是二次噴涂自行穿條商品,那些可以讓顧客隨意挑選型材色彩的多數是二次噴涂自行穿條商品,產質量量無法與原廠原裝商品比較。濟南斷橋鋁門窗
    1, try choosing original factory original package goods, not secondary spraying to wear a commodity, and choose those that let customers profile color mostly secondary spraying to wear the commodity, quantity of yield and quality can't compare with original factory original package goods.
    2、隔熱條:隔熱條使斷橋鋁型材要害構成部分,必需運用PA66尼龍,這是國度標準規矩的,但現在裝飾市場上許多廠家運用廉價的PVC塑料隔熱條,這將嚴重影響商品運用壽數。
    Article 2, article insulation: insulation broken bridge aluminum most crucial part, must use PA66 nylon, this is the country standard rules, but now many manufacturers use cheap PVC plastic decoration market heat insulation, this will seriously affect the product use life spans.
    3、型材壁厚:一般作家裝商品,門窗廠多數選用出材率高的商品也即是壁厚比較薄的商品以下降造價,象瑞達出產的1.3厚就低于國標。國標規矩:型材厚度應大于或等于1.4mm。
    3, profile wall thickness: general writer pack goods, Windows and doors factory of high rate of most of the material goods that wall thickness is thin to decline cost, goods like rita from 1.3 thickness is lower than the national standard. National standard rules: material thickness should be greater than or equal to 1.4 mm.
    本文由濟南斷橋鋁門窗廠向大家友情奉獻.多有關的知識請點擊:http://www.policedontmove.com/我們將傾情為您解答.
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分