塑鋼門窗三聯體的維護保養工作
Window of model steel door triplet maintenance work
1、分水濾氣器存水杯內的積水應及時排出，濾芯應每周清洗一次。
濟南斷橋鋁門窗
1, water gas filter to save water in the water should be timely eduction, filter should be cleaned once a week.
2、減壓閥應在下班后將調壓閥蓋旋松，使壓力表回零，以免使閥內的膜片經常受壓發生塑性變形。
2, pressure reducing valve should be after the pressure regulating valve cover, unscrew the pressure gauge to zero, lest make often occurs compressive plastic deformation of diaphragm valve.
3、油霧器油杯內應運用N32號機械油，油面高度堅持在1/2～2/3油位，滴油量調整為每分鐘一滴。
3, oil mist device oil cup should be using the machine oil N32 by mechanical blending, oil level height insisted on 1/2 ~ 2/3 oil level, the drops of oil amount is adjusted for a drop per minute.
應經常觀察油杯底部能否堆積有水和雜質，潤滑油能否變色，混濁，如有此現象應立刻改換潤滑油。
Often should observe oil cup can accumulate at the bottom of the water and impurities, lubricating oil can change color, opacity, if you have this phenomenon should immediately change lubricating oil.
本文由
濟南斷橋鋁門窗廠整理發表提供，詳情請關注公司網站：
http://www.policedontmove.com/
