玻璃陽光房頂結構膠的施工方法是:
Sunshine glass roof structural adhesive construction method is:
一步:把玻璃的邊清理干凈。把玻璃固定到位。在玻璃邊緣進3MM處貼美文紙。
Step one: the edge of the glass clean. The glass is fixed in place. On the edge of the glass into 3 mm stick paper notes.
第二步:用結構膠往縫里填到60%。
濟南陽光房
The second step: use a structural adhesive to fill to 60% into the seam.
第三步:用和縫大小的泡抹棒往里壓填充,把膠往玻璃與型材的縫里擠。
Step 3: use seam and the size of the bubble stick into pressure filling, put the glue to squeeze into the glass and profile of the seam.
第四步:填充耐候密封膠,用刮刀來回30度角度刮2篇。缺膠的補上,30分內把紙揭掉。
Step 4: fill weathering sealant, with blade Angle of 30 degrees blow 2 back and forth. Lack of rubber patch, the paper to remove the 30 minutes.
而陽光房行業的特性(工程相對小,在場施工時間短,如有的只要一天時間就能造好)這一特性就決定了在施工過程中公司不可能像高檔裝璜公司、大型建筑公司一樣派監理、項目經理等時時在場監督;
And the characteristics of the sun room industry (engineering is relatively small, the presence of short construction time, such as some as long as a day can make good) this feature determines the company can't be in the process of construction as a high-grade decoration companies, large construction company sent always present supervision such as supervision, project manager;
這樣的特性就決定了相當一部分陽光房未按要求打膠。造成了陽光房在兩三年后會經常有小漏水的小毛病。
This characteristic determines the quite a part of the sun room not according to requirements of sealant. Result in two to three years in the sun room often has little leaking problem.
本文由濟南陽光房銷售公司整理發表提供,詳情請關注公司網站:http://www.policedontmove.com/