<rp id="ehf8e"></rp>
<th id="ehf8e"></th>

  1. <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    <tbody id="ehf8e"><noscript id="ehf8e"></noscript></tbody>

    春林門窗

    聯系我們
    濟南槐蔭春林門窗廠
    地址:濟南栗山路美里湖消防站對面
    電話:13506414902
    手機:13506414902
    聯系人:張經理
    當前位置:首頁-新聞資訊 -公司動態
    公司動態
    介紹肯德基門窗的擠壓成型工藝
    來源: 2016-03-08 11:55:12
    介紹肯德基門窗的擠壓成型工藝
    KFC doors and Windows of extrusion technology
    擠壓成型是在鑄錠加熱、擠壓、冷卻、張力矯直、鋸切等工序構成的一條自動生產線上進行。生產線上的設備,包括感應加熱爐、擠壓機、出爐臺、出料運輸機、型材提升移送裝置、冷床、張力矯直機、貯料臺、牽引機、鋸床等。
    Is in ingot heating extrusion, extrusion, cooling and tension straightening and cutting process consisting of a automatic production line. The production line equipment, including induction heating furnace, extrusion machine, from Taiwan, discharging conveyor, profile transfer device, cooling bed, tension straightening machine, storage platform, tractors, sawing machine, etc.
    鑄錠的加熱溫度一般控制在400℃~520℃,溫度過高或過低都將直接影響擠壓成型。擠壓機一般采用單動油壓機,其噸位在1200噸~2500噸之間。濟南斷橋鋁門窗
    General control heating temperature of ingot in 400 ℃ ~ 520 ℃, the temperature too high or too low will directly affect the extrusion. Extrusion machine generally adopts the single-acting hydraulic press, the tonnage between 1200 tons to 2500 tons.
    擠壓機的擠壓筒直徑大小,隨擠壓機噸位大小變動,擠壓機噸位大,擠壓筒直徑也大。擠壓筒直徑一般在150mm~300mm范圍內。
    Extruder extrusion cylinder diameter size, size changes with the extruder tonnage, extrusion press tonnage, extrusion cylinder diameter is also big. Container within 150 mm to 300 mm in diameter.
    擠壓工具工作溫度為360℃~460℃,擠壓速度20 m/min~80m/min。 擠壓工具主要包括模具。擠壓模具根據結構特點分為平模、分瓣模、舌型模和分流組合模。
    Extrusion tool working temperature is 360 ℃ ~ 460 ℃, the extrusion speed of 20 m/min to 80 m/min. Extrusion tools including mold. Extrusion die according to the structure characteristics of divided into flat, tongue split mold, mold and shunt combination mode.
    生產鋁合金門窗型材多用平模和分流組合模。 出料臺接收來自擠壓機擠出的型材,并把型材過渡到出料工作臺。
    Production of aluminum alloy doors and Windows profile multi-purpose flat die and shunt combination mode. Discharge received from extrusion machine extrusion of profiles, and the transition section to discharge the workbench.
    出料工作臺多是橫條運輸機型,其橫條運動速度與擠壓速度同步。 冷床多為步進梁式,下面安裝有相當數量的風機,保證型材均勻冷卻,使型材在矯直前溫度低于70 ℃。
    Discharging workbench is horizontal transport aircraft, the horizontal movement speed and extrusion speed synchronization. Cooling bed is walking beam type, the following installation fan, there are a number of guarantee profiles uniform cooling, make the profile before straightening temperature below 70 ℃.
    張力矯直機帶有扭轉鉗口,可以邊扭轉校正邊拉伸矯直。 張力矯直機后是貯料臺,向鋸床工作臺提供型材,鋸床按定尺鋸斷型材。
    Tension leveller with reverse jaw, can reverse the correction while stretching. Storage after the tension leveller is Taiwan, to provide sawing machine workbench profiles, sawing machine according to the scale sawing profile.
    [聲明] 本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請第一時間與我們聯系,未經溝通本站不承擔相關法律責任!
    在線咨詢
    陕西快乐10分