檢查接地
Check the grounding
濟南斷橋鋁門窗設備除直線布置形式的焊接機及水槽銑床等少數設備為單相電源供電外,其余設備均為三相四線制供電.為確保人員安全,設備應按規定要求可靠接地,并在每次開機前都應檢查接地是否有效.檢查潤滑部位
Broken bridge aluminum alloy doors and Windows equipment in addition to the straight line layout forms of welding machine and sink a few equipment for single-phase power supply such as milling machine, the rest of the equipment are in three phase four wire system power supply. In order to ensure the personnel safety, equipment shall be in accordance with the requirements and reliable grounding, and should check whether the ground is effective in front of the computer. Check the lubrication part
對于斷橋鋁合金門窗設備運行中具有相對運動的定動接觸面,如機床導軌表面、各處軸承與軸等處需要潤滑的部位,應根據運動特性等方面的因素,加注潤滑油或潤滑脂進行潤滑.
For the broken bridge aluminum alloy doors and Windows in the operation of the equipment has the relative motion of the moving contact surfaces, such as machine tool guideway surface, everywhere the place such as bearings and shaft need lubricating parts, should according to the movement characteristics of factors, filling lubricating oil or grease lubrication.
具體設備機械結構不同,其潤滑部位及潤滑方式也不相同,需視具體設備而定.在門窗設備中大量使用的氣源處理三聯體,每次開機之前都要檢查其油霧器油杯內的油面高度,并使之保持準確的油面高度.
Specific equipment mechanical structure, the lubrication parts and lubrication methods are different, depending on the specific equipment. Air is used in great quantities in the doors and Windows equipment processing triplet, every boot before to check the oil level of oil mist in the oil cup of height, and make it keep accurate height of oil level.
檢查門窗設備供電、供氣情況
Check the doors and Windows equipment power supply, gas supply situation
斷橋鋁合金門窗設備大多數為電氣及氣動控制設備,應保證正常的供電及供氣,以便保證斷橋鋁合金門窗設備正常運行.否則,輕者可能產生不能如期工作或影響加工質量等問題,重者可能引發安全事故.所以開機工作之前,對斷橋鋁合金門窗設備供電、供氣情況的檢查,對于保證正常生產十分重要.
Broken bridge aluminum alloy doors and Windows equipment most for the electric and pneumatic control equipment, should guarantee the normal power supply and gas supply, in order to ensure the normal operation of broken bridge aluminum alloy doors and Windows equipment. Otherwise, light person can't work on schedule may be produced or affect the machining quality problem, the person that weigh can cause accidents. So the boot before work, the broken bridge aluminum alloy doors and Windows equipment power supply, gas supply situation of inspection, to ensure the normal production is very important.